PRODUCTS
2 Axis Lathe Machine SZGH-46Z with Standard Type Screw and Guide Rail, Bearing
Category
CNC lathe machine
2 Axis Lathe Machine SZGH-46Z with Standard Type Screw and Guide Rail, Bearing
Product description
2 Axis Lathe Machine SZGH-46Z with Standard Type Screw and Guide Rail, Bearing
SZGH-46Z (Default) X axis :900mm;Zaxis :300mm or X axis :1000mm;Zaxis :400mm,
1) SZGH 130 motor 1.5KW, X axis with brake, Z axis without brake,;
2)SZGH 2 axis CNC lathe controller ;
3) standard type screw and guide rail, bearing ;
4) spindle servo motor ;
Keyword:
szgh-46j
axis
motor
brake
zaxis
szgh
standard
szgh-46z
lathe
type
-
SZGH Vertical Milling Machine SZGH-650 With High Speed And High Precision Parts MachiningSZGH Gantry Vertical Machining Center High Speed And High Precision Parts Machining Center China Cnc MachineSZGH Vertical Milling Machine SZGH-650 With High Speed And High Precision Parts Machining0.00SZGH Gantry Vertical Machining Center High Speed And High Precision Parts Machining Center China Cnc Machine -
SZGH New Arrival 2 axis Mini CNC Lathe Machine for Metal ProcessingMetal-Cutting CNC Machine Tools, CNC Non-Conventional Machine Tools, Metal-Forming CNC Machine ToolsSZGH New Arrival 2 axis Mini CNC Lathe Machine for Metal Processing0.00Metal-Cutting CNC Machine Tools, CNC Non-Conventional Machine Tools, Metal-Forming CNC Machine Tools -
3 Axis Modbus Ethercat Type CNC Controller for Milling MachineCNC Controller, including economic type, standard type, high-performance type and Modbus type( which can support EtherCAT/Powerlink). It can be 16 axes at max. 1)2-8 Axes Modbus series CNC controller for milling or lathe & turning center Each axis can be controlled with any speed alone 2) Support Modbus(Powerlink)/EtherCAT absolute type servo system 3) 800x600 8.4 inch real color TFT displayer 4) Support PLC and macro function, ARM core, and DSP , FPGA 4) 2ms interpolate cycle,max speed is 300m/min, Interpolating speed is 30m/min 6) Adapted servo spindle can realize spindle continous position,rigid tapping,rigid screw processing 7) High anti-jamming switch power(220VAC -> 24VDC&5V) 8) Standard:128MB Memory ,can expansion to 32G 9) With USB interface,it supports file operation in flash disk,system configuration and software upgrade 10) Spindle control with Fully Pulse&dual Analog voltage output(0~10V) 11) 32 bits high performance, low power consumption industrial grade ARM microprocessor. 12) Basic I/O : 48*32 , can expansion to 64*32,user can be edited freely 13) 54pcs of workpiece coordinate system&Pre-Read function without limitation 14) English menu, program and interface, full screen edition Application : CNC wooding progressing equipment,CNC milling machinery , CNC drilling machinery ,CNC router machine, and CNC engraving machine3 Axis Modbus Ethercat Type CNC Controller for Milling Machine0.00CNC Controller, including economic type, standard type, high-performance type and Modbus type( which can support EtherCAT/Powerlink). It can be 16 axes at max. 1)2-8 Axes Modbus series CNC controller for milling or lathe & turning center Each axis can be controlled with any speed alone 2) Support Modbus(Powerlink)/EtherCAT absolute type servo system 3) 800x600 8.4 inch real color TFT displayer 4) Support PLC and macro function, ARM core, and DSP , FPGA 4) 2ms interpolate cycle,max speed is 300m/min, Interpolating speed is 30m/min 6) Adapted servo spindle can realize spindle continous position,rigid tapping,rigid screw processing 7) High anti-jamming switch power(220VAC -> 24VDC&5V) 8) Standard:128MB Memory ,can expansion to 32G 9) With USB interface,it supports file operation in flash disk,system configuration and software upgrade 10) Spindle control with Fully Pulse&dual Analog voltage output(0~10V) 11) 32 bits high performance, low power consumption industrial grade ARM microprocessor. 12) Basic I/O : 48*32 , can expansion to 64*32,user can be edited freely 13) 54pcs of workpiece coordinate system&Pre-Read function without limitation 14) English menu, program and interface, full screen edition Application : CNC wooding progressing equipment,CNC milling machinery , CNC drilling machinery ,CNC router machine, and CNC engraving machine -
SZGH-S450-B-4 SZGH 4 AXIS 3kg 450mm reaching Scara robot armApplications:Material handling,Parts transmission,Stacking and dispensing. Warranty period:2 Years. Technical Service:Lifelong technical service support.SZGH-S450-B-4 SZGH 4 AXIS 3kg 450mm reaching Scara robot arm0.00Applications:Material handling,Parts transmission,Stacking and dispensing. Warranty period:2 Years. Technical Service:Lifelong technical service support. -
SZGH General -Purpose Robot Suitable for HandlingApplications:Material handling,Parts transfer,Machine management,Testing,Gluing,Assembly. Warranty period:2 Years. Technical Service:Lifelong technical service support.SZGH General -Purpose Robot Suitable for Handling0.00Applications:Material handling,Parts transfer,Machine management,Testing,Gluing,Assembly. Warranty period:2 Years. Technical Service:Lifelong technical service support. -
SZGH Welding Robot With Fully Enclosed Axis PositionerApplications:Welding Metal Meterial Warranty period:2 Years Technical Service:Lifelong technical service supportSZGH Welding Robot With Fully Enclosed Axis Positioner0.00Applications:Welding Metal Meterial Warranty period:2 Years Technical Service:Lifelong technical service support -
CNC Machine Center VMC650 Vertical Machining Center Controlled by X, Y and Z Coordinates with Drilling Milling Boring FunctionsThe feed axis of VMC650 series machining center is controlled by X, Y and Z coordinates, and the main axis is driven by servo motor. It can realize the drilling, milling, boring, expanding, reaming, tapping and other processes of various complex parts such as disk, plate, shell, CAM and die in a clamping process. It is suitable for the single and batch production of various complex parts in vari ous industries. The process is programmed to shorten the production cycle, so that the user can obtain good economic benefits.CNC Machine Center VMC650 Vertical Machining Center Controlled by X, Y and Z Coordinates with Drilling Milling Boring Functions0.00The feed axis of VMC650 series machining center is controlled by X, Y and Z coordinates, and the main axis is driven by servo motor. It can realize the drilling, milling, boring, expanding, reaming, tapping and other processes of various complex parts such as disk, plate, shell, CAM and die in a clamping process. It is suitable for the single and batch production of various complex parts in vari ous industries. The process is programmed to shorten the production cycle, so that the user can obtain good economic benefits. -
Turn-mill Function Machinery with 4 Power Head on the Y AxisSZGH-36J Y axis X axis :600mm;Zaxis :230mm,base on SZGH-36J,to add 4 power head on the Y axis 1)SZGH 130 motor 1.5KW, X axis with brake, Z axis without brake; 2) SZGH 2 axis CNC lathe controller ; 3) standard type screw and guide rail, bearing ; 4) 3.7KW spindle servo motor ;Turn-mill Function Machinery with 4 Power Head on the Y Axis0.00SZGH-36J Y axis X axis :600mm;Zaxis :230mm,base on SZGH-36J,to add 4 power head on the Y axis 1)SZGH 130 motor 1.5KW, X axis with brake, Z axis without brake; 2) SZGH 2 axis CNC lathe controller ; 3) standard type screw and guide rail, bearing ; 4) 3.7KW spindle servo motor ; -
Turn-mill Function Machinery SZGH-46Y with Y-axis 4+4 Power Head and 8-Station Servo TurretSZGH-46J Y axis (Default) X axis :900mm;Zaxis :300mm or X axis :1000mm;Zaxis :400mm,base on SZGH-46J, to add 4+4 power head on the Y axis 1) SZGH 130 motor 1.5KW, X axis with brake, Z axis without brake,; 2) SZGH 2 axis CNC lathe controller ; 3) standard type screw and guide rail, bearing ; 4) spindle servo motor ; 5) 8 -station servo turret ;Turn-mill Function Machinery SZGH-46Y with Y-axis 4+4 Power Head and 8-Station Servo Turret0.00SZGH-46J Y axis (Default) X axis :900mm;Zaxis :300mm or X axis :1000mm;Zaxis :400mm,base on SZGH-46J, to add 4+4 power head on the Y axis 1) SZGH 130 motor 1.5KW, X axis with brake, Z axis without brake,; 2) SZGH 2 axis CNC lathe controller ; 3) standard type screw and guide rail, bearing ; 4) spindle servo motor ; 5) 8 -station servo turret ; -
2 Axis Lathe Machine SZGH-46Z with Standard Type Screw and Guide Rail, BearingSZGH-46Z (Default) X axis :900mm;Zaxis :300mm or X axis :1000mm;Zaxis :400mm, 1) SZGH 130 motor 1.5KW, X axis with brake, Z axis without brake,; 2)SZGH 2 axis CNC lathe controller ; 3) standard type screw and guide rail, bearing ; 4) spindle servo motor ;2 Axis Lathe Machine SZGH-46Z with Standard Type Screw and Guide Rail, Bearing0.00SZGH-46Z (Default) X axis :900mm;Zaxis :300mm or X axis :1000mm;Zaxis :400mm, 1) SZGH 130 motor 1.5KW, X axis with brake, Z axis without brake,; 2)SZGH 2 axis CNC lathe controller ; 3) standard type screw and guide rail, bearing ; 4) spindle servo motor ;
-
High Precision 2 Axis Lathe Machine SZGH-46J for Processing of Bar Material Within 45MMLongitudinal and cross feeds are effected by ball lead screws, driven by servo motors; Either vertical or horizontal 4-station or 6 station tool post or gang tools can be selected; The post is located in precision contrite gears with a high repeated positioning accuracy; Both chuck and tail stock are supplied with hydraulic or manual type; The surface of the bed ways is supersonic frequency hardened and precision ground with a long service life; The spindle system is high in the stability and accuracy; Mainly used for turning inner and outer cylindrical surface, end surface, taper surface, arc surface and thread of shaft, etc., with high efficiency and accurate processing; The bed way has been finely grinned after ultra-tone quenching; It is applied to various line like automobile, valve, electric tools and hardware, etc.High Precision 2 Axis Lathe Machine SZGH-46J for Processing of Bar Material Within 45MM0.00Longitudinal and cross feeds are effected by ball lead screws, driven by servo motors; Either vertical or horizontal 4-station or 6 station tool post or gang tools can be selected; The post is located in precision contrite gears with a high repeated positioning accuracy; Both chuck and tail stock are supplied with hydraulic or manual type; The surface of the bed ways is supersonic frequency hardened and precision ground with a long service life; The spindle system is high in the stability and accuracy; Mainly used for turning inner and outer cylindrical surface, end surface, taper surface, arc surface and thread of shaft, etc., with high efficiency and accurate processing; The bed way has been finely grinned after ultra-tone quenching; It is applied to various line like automobile, valve, electric tools and hardware, etc.
-
SZGH-46J Equipped with Hydraulic Chucks Processing of Large Parts with High Precision and RigidityLongitudinal and cross feeds are effected by ball lead screws, driven by servo motors; Either vertical or horizontal 4-station or 6 station tool post or gang tools can be selected; The post is located in precision contrite gears with a high repeated positioning accuracy; Both chuck and tail stock are supplied with hydraulic or manual type; The surface of the bed ways is supersonic frequency hardened and precision ground with a long service life; The spindle system is high in the stability and accuracy; Mainly used for turning inner and outer cylindrical surface, end surface, taper surface, arc surface and thread of shaft, etc., with high efficiency and accurate processing; The bed way has been finely grinned after ultra-tone quenching; It is applied to various line like automobile, valve, electric tools and hardware, etc.SZGH-46J Equipped with Hydraulic Chucks Processing of Large Parts with High Precision and Rigidity0.00Longitudinal and cross feeds are effected by ball lead screws, driven by servo motors; Either vertical or horizontal 4-station or 6 station tool post or gang tools can be selected; The post is located in precision contrite gears with a high repeated positioning accuracy; Both chuck and tail stock are supplied with hydraulic or manual type; The surface of the bed ways is supersonic frequency hardened and precision ground with a long service life; The spindle system is high in the stability and accuracy; Mainly used for turning inner and outer cylindrical surface, end surface, taper surface, arc surface and thread of shaft, etc., with high efficiency and accurate processing; The bed way has been finely grinned after ultra-tone quenching; It is applied to various line like automobile, valve, electric tools and hardware, etc.
-
SZGH 3 Axis Milling Machine with 4.5KW Spindle Motor 8 Station Tool MagazineMetal-Cutting CNC Machine Tools, CNC Non-Conventional Machine Tools, Metal-Forming CNC Machine ToolsSZGH 3 Axis Milling Machine with 4.5KW Spindle Motor 8 Station Tool Magazine0.00Metal-Cutting CNC Machine Tools, CNC Non-Conventional Machine Tools, Metal-Forming CNC Machine Tools -
Milling Machine SZGH-540A with Drilling and Tapping Fucntion 2.6KW Spindle Motor BT30Metal-Cutting CNC Machine Tools, CNC Non-Conventional Machine Tools, Metal-Forming CNC Machine ToolsMilling Machine SZGH-540A with Drilling and Tapping Fucntion 2.6KW Spindle Motor BT300.00Metal-Cutting CNC Machine Tools, CNC Non-Conventional Machine Tools, Metal-Forming CNC Machine Tools
-
SZGH 3 Axis CNC Milling Machine with X Z Y Axis 8 Station Tool MagazineMetal-Cutting CNC Machine Tools, CNC Non-Conventional Machine Tools, Metal-Forming CNC Machine ToolsSZGH 3 Axis CNC Milling Machine with X Z Y Axis 8 Station Tool Magazine0.00Metal-Cutting CNC Machine Tools, CNC Non-Conventional Machine Tools, Metal-Forming CNC Machine Tools
-
SZGH--540A High Precision CNC Vertical Milling Machining Center Support Forth Axis Rotary StageSZGH Gantry Vertical Machining Center High Speed And High Precision Parts Machining Center China Cnc MachineSZGH--540A High Precision CNC Vertical Milling Machining Center Support Forth Axis Rotary Stage0.00SZGH Gantry Vertical Machining Center High Speed And High Precision Parts Machining Center China Cnc Machine
-
3 Axis Low Cost Machining Center 4 axis cnc milling machine Vertical MetalMetal-Cutting CNC Machine Tools, CNC Non-Conventional Machine Tools, Metal-Forming CNC Machine Tools3 Axis Low Cost Machining Center 4 axis cnc milling machine Vertical Metal0.00Metal-Cutting CNC Machine Tools, CNC Non-Conventional Machine Tools, Metal-Forming CNC Machine Tools
-
SZGH Gantry Vertical Machining Center High Speed And High Precision Parts Machining Center China Cnc MachineSZGH Gantry Vertical Machining Center High Speed And High Precision Parts Machining Center China Cnc MachineSZGH Gantry Vertical Machining Center High Speed And High Precision Parts Machining Center China Cnc Machine0.00SZGH Gantry Vertical Machining Center High Speed And High Precision Parts Machining Center China Cnc Machine
-
China Suppliers Standard Drilling Function CNC Milling Machine or CNC Machine CenterMetal-Cutting CNC Machine Tools, CNC Non-Conventional Machine Tools, Metal-Forming CNC Machine ToolsChina Suppliers Standard Drilling Function CNC Milling Machine or CNC Machine Center0.00Metal-Cutting CNC Machine Tools, CNC Non-Conventional Machine Tools, Metal-Forming CNC Machine Tools
-
SZGH-36J 2 Axis Lathe Machine for Turning With Flying Cutter End-one or side-one Power HeadLongitudinal and cross feeds are effected by ball lead screws, driven by servo motors; Either vertical or horizontal 4-station or 6 station tool post or gang tools can be selected; The post is located in precision contrite gears with a high repeated positioning accuracy; Both chuck and tail stock are supplied with hydraulic or manual type; The surface of the bed ways is supersonic frequency hardened and precision ground with a long service life; The spindle system is high in the stability and accuracy; Mainly used for turning inner and outer cylindrical surface, end surface, taper surface, arc surface and thread of shaft, etc., with high efficiency and accurate processing; The bed way has been finely grinned after ultra-tone quenching; It is applied to various line like automobile, valve, electric tools and hardware, etc.SZGH-36J 2 Axis Lathe Machine for Turning With Flying Cutter End-one or side-one Power Head0.00Longitudinal and cross feeds are effected by ball lead screws, driven by servo motors; Either vertical or horizontal 4-station or 6 station tool post or gang tools can be selected; The post is located in precision contrite gears with a high repeated positioning accuracy; Both chuck and tail stock are supplied with hydraulic or manual type; The surface of the bed ways is supersonic frequency hardened and precision ground with a long service life; The spindle system is high in the stability and accuracy; Mainly used for turning inner and outer cylindrical surface, end surface, taper surface, arc surface and thread of shaft, etc., with high efficiency and accurate processing; The bed way has been finely grinned after ultra-tone quenching; It is applied to various line like automobile, valve, electric tools and hardware, etc.
WeCha
search“GuanHong”
E-mail: sales04@szghauto.com
Mobile: +86-13728601949
Tel: +86-755-26099399
Fax: +86-755-61885186
Skype: szgh2008
what app&We chat ID: +86-13728601949
what app&We chat ID: +86-13434733855
Message
Message
Description:
Shenzhen Guan Hong Automation Co.,LTD. 粤ICP备19031174号 Powered by www.300.cn SEO