PRODUCTS
2HSS57 Closed Loop Stepper Driver / Easy Servo Driver
Category
Closed loop Stepper Motors & Driver
2HSS57 Closed Loop Stepper Driver / Easy Servo Driver
Product description
▶ Features:
1) External adjustable microstepping function (New)
2) CCW and CW adjustable and easy operation motor’ forward and reverse(New)
3) Full closed loop control
4) Encoder 1000PPR
5) Nearly 100% output torque
6) Fast response, high speed
7) Input under position control mode:
A. Pulse+ direction
B. Pulse +negative direction
C. Dual pulse
D. Communication
8) Optical isolation servo reset input interface ERC
9) Optical isolation alarm output interface ALM
10) Current loop width: (-3dB) 2KHz (typical value )
11) Velocity loop width:500Hz (typical value)
12) Position loop width:200Hz (typical value)
13) Encoder input interface: differential input (26LS32)
14) Can download parameter with RS232 cable or text display.
15) Protection for over current, over voltage, under voltage, over heat, over speed, over proof.
16) Green LED means on, red LED means protection or in fault status.
SW1: Set of Detection Input edge, OFF detect Up edge , ON detect Down edge.
SW2: Switch of direction of motor, OFF- CCW , ON-CW.
-
SZGH-650A (3.7kw)SZGH Gantry Vertical Machining Center High Speed And High Precision Parts Machining Center China Cnc MachineSZGH-650A (3.7kw)0.00SZGH Gantry Vertical Machining Center High Speed And High Precision Parts Machining Center China Cnc Machine -
SZGH-25Metal-Cutting CNC Machine Tools, CNC Non-Conventional Machine Tools, Metal-Forming CNC Machine ToolsSZGH-250.00Metal-Cutting CNC Machine Tools, CNC Non-Conventional Machine Tools, Metal-Forming CNC Machine Tools -
SZGH-CNC1000MDi-3CNC Controller, including economic type, standard type, high-performance type and Modbus type( which can support EtherCAT/Powerlink). It can be 16 axes at max. 1)2-8 Axes Modbus series CNC controller for milling or lathe & turning center Each axis can be controlled with any speed alone 2) Support Modbus(Powerlink)/EtherCAT absolute type servo system 3) 800x600 8.4 inch real color TFT displayer 4) Support PLC and macro function, ARM core, and DSP , FPGA 4) 2ms interpolate cycle,max speed is 300m/min, Interpolating speed is 30m/min 6) Adapted servo spindle can realize spindle continous position,rigid tapping,rigid screw processing 7) High anti-jamming switch power(220VAC -> 24VDC&5V) 8) Standard:128MB Memory ,can expansion to 32G 9) With USB interface,it supports file operation in flash disk,system configuration and software upgrade 10) Spindle control with Fully Pulse&dual Analog voltage output(0~10V) 11) 32 bits high performance, low power consumption industrial grade ARM microprocessor. 12) Basic I/O : 48*32 , can expansion to 64*32,user can be edited freely 13) 54pcs of workpiece coordinate system&Pre-Read function without limitation 14) English menu, program and interface, full screen edition Application : CNC wooding progressing equipment,CNC milling machinery , CNC drilling machinery ,CNC router machine, and CNC engraving machineSZGH-CNC1000MDi-30.00CNC Controller, including economic type, standard type, high-performance type and Modbus type( which can support EtherCAT/Powerlink). It can be 16 axes at max. 1)2-8 Axes Modbus series CNC controller for milling or lathe & turning center Each axis can be controlled with any speed alone 2) Support Modbus(Powerlink)/EtherCAT absolute type servo system 3) 800x600 8.4 inch real color TFT displayer 4) Support PLC and macro function, ARM core, and DSP , FPGA 4) 2ms interpolate cycle,max speed is 300m/min, Interpolating speed is 30m/min 6) Adapted servo spindle can realize spindle continous position,rigid tapping,rigid screw processing 7) High anti-jamming switch power(220VAC -> 24VDC&5V) 8) Standard:128MB Memory ,can expansion to 32G 9) With USB interface,it supports file operation in flash disk,system configuration and software upgrade 10) Spindle control with Fully Pulse&dual Analog voltage output(0~10V) 11) 32 bits high performance, low power consumption industrial grade ARM microprocessor. 12) Basic I/O : 48*32 , can expansion to 64*32,user can be edited freely 13) 54pcs of workpiece coordinate system&Pre-Read function without limitation 14) English menu, program and interface, full screen edition Application : CNC wooding progressing equipment,CNC milling machinery , CNC drilling machinery ,CNC router machine, and CNC engraving machine -
SZGH-S450-B-4 SZGH 4 AXIS 3kg 450mm reaching Scara robot armApplications:Material handling,Parts transmission,Stacking and dispensing. Warranty period:2 Years. Technical Service:Lifelong technical service support.SZGH-S450-B-4 SZGH 4 AXIS 3kg 450mm reaching Scara robot arm0.00Applications:Material handling,Parts transmission,Stacking and dispensing. Warranty period:2 Years. Technical Service:Lifelong technical service support. -
SZGH-T9905Applications:Material handling,Parts transfer,Machine management,Testing,Gluing,Assembly. Warranty period:2 Years. Technical Service:Lifelong technical service support.SZGH-T99050.00Applications:Material handling,Parts transfer,Machine management,Testing,Gluing,Assembly. Warranty period:2 Years. Technical Service:Lifelong technical service support. -
SZGH-H1500-B-6Applications:Welding Metal Meterial Warranty period:2 Years Technical Service:Lifelong technical service supportSZGH-H1500-B-60.00Applications:Welding Metal Meterial Warranty period:2 Years Technical Service:Lifelong technical service support -
SZGH-36J Y axisSZGH-36J Y axis X axis :600mm;Zaxis :230mm,base on SZGH-36J,to add 4 power head on the Y axis 1)SZGH 130 motor 1.5KW, X axis with brake, Z axis without brake; 2) SZGH 2 axis CNC lathe controller ; 3) standard type screw and guide rail, bearing ; 4) 3.7KW spindle servo motor ;SZGH-36J Y axis0.00SZGH-36J Y axis X axis :600mm;Zaxis :230mm,base on SZGH-36J,to add 4 power head on the Y axis 1)SZGH 130 motor 1.5KW, X axis with brake, Z axis without brake; 2) SZGH 2 axis CNC lathe controller ; 3) standard type screw and guide rail, bearing ; 4) 3.7KW spindle servo motor ; -
SZGH-46J Y axisSZGH-46J Y axis (Default) X axis :900mm;Zaxis :300mm or X axis :1000mm;Zaxis :400mm,base on SZGH-46J, to add 4+4 power head on the Y axis 1) SZGH 130 motor 1.5KW, X axis with brake, Z axis without brake,; 2) SZGH 2 axis CNC lathe controller ; 3) standard type screw and guide rail, bearing ; 4) spindle servo motor ; 5) 8 -station servo turret ;SZGH-46J Y axis0.00SZGH-46J Y axis (Default) X axis :900mm;Zaxis :300mm or X axis :1000mm;Zaxis :400mm,base on SZGH-46J, to add 4+4 power head on the Y axis 1) SZGH 130 motor 1.5KW, X axis with brake, Z axis without brake,; 2) SZGH 2 axis CNC lathe controller ; 3) standard type screw and guide rail, bearing ; 4) spindle servo motor ; 5) 8 -station servo turret ; -
SZGH-46ZSZGH-46Z (Default) X axis :900mm;Zaxis :300mm or X axis :1000mm;Zaxis :400mm, 1) SZGH 130 motor 1.5KW, X axis with brake, Z axis without brake,; 2)SZGH 2 axis CNC lathe controller ; 3) standard type screw and guide rail, bearing ; 4) spindle servo motor ;SZGH-46Z0.00SZGH-46Z (Default) X axis :900mm;Zaxis :300mm or X axis :1000mm;Zaxis :400mm, 1) SZGH 130 motor 1.5KW, X axis with brake, Z axis without brake,; 2)SZGH 2 axis CNC lathe controller ; 3) standard type screw and guide rail, bearing ; 4) spindle servo motor ;
-
SZGH-46J (8 station turret)Longitudinal and cross feeds are effected by ball lead screws, driven by servo motors; Either vertical or horizontal 4-station or 6 station tool post or gang tools can be selected; The post is located in precision contrite gears with a high repeated positioning accuracy; Both chuck and tail stock are supplied with hydraulic or manual type; The surface of the bed ways is supersonic frequency hardened and precision ground with a long service life; The spindle system is high in the stability and accuracy; Mainly used for turning inner and outer cylindrical surface, end surface, taper surface, arc surface and thread of shaft, etc., with high efficiency and accurate processing; The bed way has been finely grinned after ultra-tone quenching; It is applied to various line like automobile, valve, electric tools and hardware, etc.SZGH-46J (8 station turret)0.00Longitudinal and cross feeds are effected by ball lead screws, driven by servo motors; Either vertical or horizontal 4-station or 6 station tool post or gang tools can be selected; The post is located in precision contrite gears with a high repeated positioning accuracy; Both chuck and tail stock are supplied with hydraulic or manual type; The surface of the bed ways is supersonic frequency hardened and precision ground with a long service life; The spindle system is high in the stability and accuracy; Mainly used for turning inner and outer cylindrical surface, end surface, taper surface, arc surface and thread of shaft, etc., with high efficiency and accurate processing; The bed way has been finely grinned after ultra-tone quenching; It is applied to various line like automobile, valve, electric tools and hardware, etc.
-
SZGH-46JLongitudinal and cross feeds are effected by ball lead screws, driven by servo motors; Either vertical or horizontal 4-station or 6 station tool post or gang tools can be selected; The post is located in precision contrite gears with a high repeated positioning accuracy; Both chuck and tail stock are supplied with hydraulic or manual type; The surface of the bed ways is supersonic frequency hardened and precision ground with a long service life; The spindle system is high in the stability and accuracy; Mainly used for turning inner and outer cylindrical surface, end surface, taper surface, arc surface and thread of shaft, etc., with high efficiency and accurate processing; The bed way has been finely grinned after ultra-tone quenching; It is applied to various line like automobile, valve, electric tools and hardware, etc.SZGH-46J0.00Longitudinal and cross feeds are effected by ball lead screws, driven by servo motors; Either vertical or horizontal 4-station or 6 station tool post or gang tools can be selected; The post is located in precision contrite gears with a high repeated positioning accuracy; Both chuck and tail stock are supplied with hydraulic or manual type; The surface of the bed ways is supersonic frequency hardened and precision ground with a long service life; The spindle system is high in the stability and accuracy; Mainly used for turning inner and outer cylindrical surface, end surface, taper surface, arc surface and thread of shaft, etc., with high efficiency and accurate processing; The bed way has been finely grinned after ultra-tone quenching; It is applied to various line like automobile, valve, electric tools and hardware, etc.
-
SZGH-540D (4.5kW)Metal-Cutting CNC Machine Tools, CNC Non-Conventional Machine Tools, Metal-Forming CNC Machine ToolsSZGH-540D (4.5kW)0.00Metal-Cutting CNC Machine Tools, CNC Non-Conventional Machine Tools, Metal-Forming CNC Machine Tools -
SZGH-540C (2.6kw )Metal-Cutting CNC Machine Tools, CNC Non-Conventional Machine Tools, Metal-Forming CNC Machine ToolsSZGH-540C (2.6kw )0.00Metal-Cutting CNC Machine Tools, CNC Non-Conventional Machine Tools, Metal-Forming CNC Machine Tools
-
SZGH-540B (3.8KW) 3.8KWMetal-Cutting CNC Machine Tools, CNC Non-Conventional Machine Tools, Metal-Forming CNC Machine ToolsSZGH-540B (3.8KW) 3.8KW0.00Metal-Cutting CNC Machine Tools, CNC Non-Conventional Machine Tools, Metal-Forming CNC Machine Tools
-
SZGH--540A (2.6KW)SZGH Gantry Vertical Machining Center High Speed And High Precision Parts Machining Center China Cnc MachineSZGH--540A (2.6KW)0.00SZGH Gantry Vertical Machining Center High Speed And High Precision Parts Machining Center China Cnc Machine
-
SZGH--650D (7.5KW with tapping )Metal-Cutting CNC Machine Tools, CNC Non-Conventional Machine Tools, Metal-Forming CNC Machine ToolsSZGH--650D (7.5KW with tapping )0.00Metal-Cutting CNC Machine Tools, CNC Non-Conventional Machine Tools, Metal-Forming CNC Machine Tools
-
SZGH-650A (3.7kw)SZGH Gantry Vertical Machining Center High Speed And High Precision Parts Machining Center China Cnc MachineSZGH-650A (3.7kw)0.00SZGH Gantry Vertical Machining Center High Speed And High Precision Parts Machining Center China Cnc Machine
-
SZGH--650C (7.5KW)Metal-Cutting CNC Machine Tools, CNC Non-Conventional Machine Tools, Metal-Forming CNC Machine ToolsSZGH--650C (7.5KW)0.00Metal-Cutting CNC Machine Tools, CNC Non-Conventional Machine Tools, Metal-Forming CNC Machine Tools
-
SZGH-36JLongitudinal and cross feeds are effected by ball lead screws, driven by servo motors; Either vertical or horizontal 4-station or 6 station tool post or gang tools can be selected; The post is located in precision contrite gears with a high repeated positioning accuracy; Both chuck and tail stock are supplied with hydraulic or manual type; The surface of the bed ways is supersonic frequency hardened and precision ground with a long service life; The spindle system is high in the stability and accuracy; Mainly used for turning inner and outer cylindrical surface, end surface, taper surface, arc surface and thread of shaft, etc., with high efficiency and accurate processing; The bed way has been finely grinned after ultra-tone quenching; It is applied to various line like automobile, valve, electric tools and hardware, etc.SZGH-36J0.00Longitudinal and cross feeds are effected by ball lead screws, driven by servo motors; Either vertical or horizontal 4-station or 6 station tool post or gang tools can be selected; The post is located in precision contrite gears with a high repeated positioning accuracy; Both chuck and tail stock are supplied with hydraulic or manual type; The surface of the bed ways is supersonic frequency hardened and precision ground with a long service life; The spindle system is high in the stability and accuracy; Mainly used for turning inner and outer cylindrical surface, end surface, taper surface, arc surface and thread of shaft, etc., with high efficiency and accurate processing; The bed way has been finely grinned after ultra-tone quenching; It is applied to various line like automobile, valve, electric tools and hardware, etc.
-
SZGH-BC1600-D-6SZGH-BC1600-D-6 Axis:6 Axis. Standard Load:20kg. Weight:47kg. Repeatability:±0.03mm. Applications: 3 C electronics , Medicine ,Packaging ,Stacking ,Assembly ,Welding Warranty:1 Years. Technical Service:Lifelong technical service support.SZGH-BC1600-D-60.00SZGH-BC1600-D-6 Axis:6 Axis. Standard Load:20kg. Weight:47kg. Repeatability:±0.03mm. Applications: 3 C electronics , Medicine ,Packaging ,Stacking ,Assembly ,Welding Warranty:1 Years. Technical Service:Lifelong technical service support.
WeCha
search“GuanHong”
E-mail: sales04@szghauto.com
Mobile: +86-13728601949
Tel: +86-755-26099399
Fax: +86-755-61885186
Skype: szgh2008
what app&We chat ID: +86-13728601949
what app&We chat ID: +86-13434733855
Message
Message
Description:
Shenzhen Guan Hong Automation Co.,LTD. 粤ICP备19031174号 Powered by www.300.cn SEO